In Overheat Mod How Fix Crashing Roku 2?

How to Fix the Crashing Roku 2 device in Overheat Mode

Solution:

 If you don’t mind destroying the case of your Roku device, then just poke some holes for ventilation.
 All Roku com link user needs to peel off the rubber foot on the bottom of the roku device.
 It would just come off with your fingernail and then you will find four screw holes and there will be 6 screws. You can pick that screw and those screwdrivers up anywhere at Lowe’s or even at Wal-Mart.
 Once the case is opened, pull up the PCB board and the logic board lifts right out.
 Then you can use anything from a drill to a Dremel using brute force.
 Just punch holes all over that thing to put holes in the sides and at the top.
 If you want to make it stand down, then you don’t have to bump and then you can put it all back together in ten minutes.
 You have passive cooling to notice a huge difference on your Roku com link.
 You have a device where it froze every hour.
 If you want active cooling to buy an 80 millimeter USB power PC,  fan case will just place it anywhere on the top or bottom of your Roku.
 You will notice that air flow coming out is pretty significant even for slower rpm silent fan.
 You can see the fan turning on the power through that USB port on the side of the router.
 So you don’t need an external power to fix the crashing Roku 2 problems.

If you have any more issues with your Roku call our toll free number +1-844-965-4357 or visit Roku Activation.